ZAX 60 Silicone, Addition Cure, 60 ShA

Stock: 110g (100+10):  0 pcs
220g (200+20):  0 pcs
ZAX 60 Silicone, Addition Cure, 60 ShA
ZAX 60 Silicone, Addition Cure, 60 ShA
ZAX 60 Silicone, Addition Cure, 60 ShA
ZAX 60 Silicone, Addition Cure, 60 ShA

ZAX 60 is a two-component RTV silicone rubber, which is especially recommended for making polyester and ceramic moulds.

ZAX 60 silicone is well resistant to gypsum and is, therefore, widely used in the ceramic industry.

Main Application Areas:

mould production and modeling with significant reproductive accuracy.
Due to its high hardness, sufficient rigidity makes it appropriate for proper multiple-part tools and moulds.

Due to the flat surface and high rigidity, you can also ensure parallelity between two surfaces. ZAX 60 silicone moulds are used to replicate artistic ceramics or ceramic tools.

Because of its high viscosity, mixing components requires more practice.

For more technical parameters and application help, please visit the details tab below.

Shipping Cost :
4,7 €
Delivery Time :
1 day
not available
To Favourites
Question about the product
Similar products

Dowload the ZAX 60 Silicone Datasheet (PDF, 102 kB)

The curing process may be prevented by the following:

You have to take special care when using additive silicone systems.

While you handle and mix the silicone elastomer components, make sure that all mixing tools (vessels, spatula, mixer, etc.) are clean and made of materials that do not affect the curing process or chemical reaction.

Do not use wood and paper mixer!

The following materials may also inhibit the polymerization of the silicone resin:

  • the presence of nitrogen, sulfur, phosphorus and arsenic
  • compounds
  • organic tin catalysts
  • PVC stabilizers
  • epoxy resin catalysts

In addition, the following materials, products or materials containing them should also be kept away.

  • moulding clay
  • sulfur vulcanized tires
  • condensation silicone rubber
  • wood, paper, onion and garlic.

Similar products
Raw material state
Pot life
60 minute
Curing time
24 hour
100 000 mPas
Heat Resistance
-40 – 200 degree Celsius
Tear resistance
5 N/mm
Shore Hardness
60 ShA
Mix Ratio
100 : 10 by weight
Tensile Strength
10 MPa
Technical datasheet
110g (100+10):  0 pcs
220g (200+20):  0 pcs
Article No.
In Stock    
110 g/pcs
Be the first to review this product!
paypal barion_com stripe_com