aPraktika
aPraktika
aPraktika

F32 Polyurethane Resin, 100g

Stock: 100g (2X50):  2 pcs
200g (2X100):  3 pcs
F32 Polyurethane Resin, 100g

The F32 polyurethane resin resambles a bit to F190 resin produced by Axson.

It can be used in the same way for product and tool manufacturing.

However F32 Polyurethane resin requires more expertise therefore we recommend it modelers and prototype manufacturers with more experiences.

 


Typical features:

 

  • Very short 1.5 min pot time meanwhile, the resin must be mixed and settled to the mould.
  • Quick tool disassemble, 15-20 minutes
  • The price is a little higher than F190.
  • Mixing right 100:100% by weight
  • Very low viscosity, almost water like, good space filling
  • Best choice for casting very thin elements
  • Odorless
  • It can be painted well
  • Silicone moulds are very resistant to this resin.


Further technical parameters and application guide will found on the detail tab.

Manufacturer:
Axson
Shipping Cost :
4,7 €
4.33
To Favourites
Recommend
Print
Question about the product
Info
Details
Similar products
Opinions
Details

Download: F32 Polyurethane Resin Datasheet

Similar products
Info
Color
Raw material state
liquid
Pot life
2 minute
Viscosity
35 mPas
Mix Ratio
100 : 100 by weight
Hardness
72 Shore A
Stock
100g (2X50):  2 pcs
200g (2X100):  3 pcs
Article No.
APU003
Status
In Stock    
Weight
110 g/pcs
Opinions
Be the first to review this product!
WebShop System