Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin

Stock: 5 pcs
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin
Epoxy Resin, Crystal Clear, UV Stable, Jewellery Resin

We offer this two-component epoxy resin especially for jewellery making and for the casting of small decorating figures.


You can cast beautiful, translucent pieces from that but you can also colour them with different pigments. It’s also possible to mix with various effects such as pearl paint, aluminium powder, glitter etc.

This epoxy resin originates from the industry. Still, it has been so widespread among creative artists that we now call it jewellery resin or artist resin.



Key Features:

  • Excellent UV resistance
  • Solvent-free
  • Pot time approx. 80 minutes, but it depends on the quantity and processing temperature
  • Mixing ratio: 100: 45% by weight
  • Gel time: approx. 10-12 hours at 25 ° C
  • Tool breakdown: 36-48 hours, depending on temperature and casting weight


The use of epoxy resin for jewellery is becoming increasingly popular.

The biggest challenge of the relatively simple technology is to make beautiful and bubble-free jewellery.


This can be achieved by accurate weighing and mixing of the components according to the above description. But it would be best if you also worked very quickly to give enough time for the mixed resin to be freed from air bubbles.



Tips for exempting of air bubbles:

  • The most effective way is to place the mixed resin under a vacuum.
  • Consider the pot time to appropriately settle the epoxy resin in the mould. It is advisable to direct liquid always to a single one and the lowest point of the tool.
  • We may keep the tool filled with resin under a vacuum to achieve the best result.
  • If you have already gathered enough experience, you may try to pour the resin under a vacuum from the beginning yet.
  • In case you use a decorative element, strawflower, fabric, leather, dandelion etc., make sure these are always absolutely clean and dry.
  • Both the tools and dishes you use should be clean and free of moisture.


Brand:
Protosil kft.
Shipping Cost :
4,7 €
Delivery Time :
1 day
11.31
To Favourites
Recommend
Print
Question about the product
Info
Details
Similar products
Opinions
Details
Similar products
Info
Raw material state
liquid
Pot life
80 minute
Curing time
48 hour
Viscosity
0.25 mPas
Mix Ratio
100 : 45 by weight
Technical datasheet
Stock
5 pcs
Article No.
AEP001CS
Status
In Stock    
Weight
150 g/pcs
Opinions
Be the first to review this product!
paypal barion_com stripe_com